(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. REPLACE MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY
(a) Replace the multi-display controller sub-assembly See: Accessories and Optional Equipment/Entertainment Systems/Entertainment
System Control Module/Service and Repair/Rear Seat Entertainment ECU/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for HDD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation
System/Service and Repair/Navigation Receiver (for HDD)/Removal
OK -- END
Up to 08/2009
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for DVD): B1563,B1596: Remote Touch Disconnected
B1563 - Remote Touch Disconnected
B1596 - No Response from Remote Touch
DESCRIPTION
The display and navigation module display and remote touch (remote operation board) are connected by the MOST communication line.
When a MOST communication error occurs between the display and navigation module display and remote touch (remote operation board) , these
No comments:
Post a Comment