(d) Enter the following menus: Powertrain / Engine / Trouble Codes.
(e) Read the DTCs.
Result:
HINT
If any DTCs other than P2195, P2196, P2197 or P2198 are output, troubleshoot those DTCs first.
B -- GO TO DTC CHART See: Diagnostic Trouble Code Descriptions/SFI System
A -- Continue to next step.
2. CONFIRM IF VEHICLE HAS RUN OUT OF FUEL IN PAST
(a) Has the vehicle run out of fuel in the past?
NO -- READ VALUE USING TECHSTREAM (TEST VALUE OF AIR FUEL RATIO SENSOR)
YES -- Continue to next step.
3. PERFORM CONFIRMATION DRIVING PATTERN
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Clear the DTCs See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/DTC Check / Clear.
(e) Turn the engine switch off.
(f) Turn the engine switch on (IG) and turn the Techstream on.
(g) Start the engine and warm it up.
(h) Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.
(i) Enter the following menus: Powertrain / Engine / Utility / All Readiness.
(j) Input the DTC: P2195, P2196, P2197 or P2198.
(k) Check the DTC judgment result.
Result:
B -- READ VALUE USING TECHSTREAM (TEST VALUE OF AIR FUEL RATIO SENSOR)
A -- DTC CAUSED BY RUNNING OUT OF FUEL
4. READ VALUE USING TECHSTREAM (TEST VALUE OF AIR FUEL RATIO SENSOR)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Clear the DTCs See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Reading and Clearing
No comments:
Post a Comment