OK -- REPLACE TCM See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and
Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/U660E Automatic Transaxle/Removal
2. INSPECT ATF TEMPERATURE SENSOR
(a) Disconnect the ATF temperature sensor connector from the transmission wire.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
HINT
If the resistance is out of the specified range with the ATF temperature shown in the table below, the driveability of the vehicle
may decrease.
NG -- REPLACE ATF TEMPERATURE SENSOR ASSEMBLY See: Powertrain Management/Transmission Control
Systems/Sensors and Switches - Transmission and Drivetrain/Sensors and Switches - A/T/Transmission Temperature
Sensor/Switch/Service and Repair/U660E Automatic Transaxle/Removal
OK -- REPLACE TRANSMISSION WIRE See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Wiring
Harness/Service and Repair/U660E Automatic Transaxle/Removal
From 08/2009
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: P0712,P0713: Transmission Fluid
Temperature Sensor "A" Circuit Low Input
DESCRIPTION
The Automatic Transmission Fluid (ATF) temperature sensor converts the fluid temperature into a resistance value for use by the TCM.
No comments:
Post a Comment