Text in Illustration
(f) Reconnect the seat outer belt assembly LH and seat belt control ECU connectors.
(g) Connect the cable to the negative (-) battery terminal.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (FRONT SEAT OUTER BELT ASSEMBLY LH - SEAT
BELT CONTROL ECU)
OK -- REPLACE SEAT BELT CONTROL ECU
From 08/2009
PRE-COLLISION: PRE-COLLISION SYSTEM: B2007: Open in Seat Belt Motor LH Circuit
B2007 - Open in Seat Belt Motor LH Circuit
DESCRIPTION
The seat belt control ECU receives information from the driving support ECU using CAN communication and tightens the seat belt by operating the
motor in the front seat outer belt assembly LH.
WIRING DIAGRAM
INSPECTION PROCEDURE
CAUTION:
The pretensioner is built into the front seat outer belt assembly LH. Be sure to follow the correct inspection procedure, as failure
to follow the correct procedure (such as inspection of incorrect connectors) may deploy the pretensioner.
PROCEDURE
1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY LH
(a) Disconnect the front seat outer belt assembly LH connector.
No comments:
Post a Comment