2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 1012

(a) Connect the cable to the negative (-) battery terminal.

(b) Turn the engine switch on (IG).

(c) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Text in Illustration

NG -- REPLACE NO. 2 FLOOR WIRE

OK -- Continue to next step.

7. CHECK NO. 2 FLOOR WIRE (SHORT TO GROUND)

(a) Turn the engine switch off.

(b) Disconnect the cable from the negative (-) battery terminal.

NOTICE:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Measure the resistance according to the value(s) in the table below.