NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
11. REPLACE SUSPENSION CONTROL ECU
(a) Temporarily replace the suspension control ECU with a new or normally functioning one See: Relays and Modules/Relays and
Modules - Steering and Suspension/Relays and Modules - Suspension/Suspension Control Module/Service and Repair/Components.
(b) Check for DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
OK:
DTC B2416 is not output.
NG -- REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY) See: Lighting and Horns/Headlamp/Headlamp
Alignment Control Module/Service and Repair/Components
OK -- END
From 08/2009
LIGHTING (EXT): LIGHTING SYSTEM: B2416: Height Control Sensor Malfunction
B2416 - Height Control Sensor Malfunction
DESCRIPTION
w/o Air Suspension System:
The DTC is stored when the AFS ECU (headlight swivel ECU assembly) detects malfunctions in the rear height control sensor sub-assembly RH
power source or rear height control sensor sub-assembly RH.
w/ Air Suspension System:
* The DTC is stored when the AFS ECU (headlight swivel ECU assembly) detects malfunctions in the front height control sensor LH power
source or front height control sensor LH.
* The DTC is stored when the AFS ECU (headlight swivel ECU assembly) detects malfunctions in the rear height control sensor LH power
source or rear height control sensor LH.
No comments:
Post a Comment