Text in Illustration
HINT
Codes other than DTC B1632 and B1637 may be output at this time, but they are not related to this check.
C -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
B -- REPLACE REAR AIRBAG SENSOR LH
A -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY See: Relays and Modules/Relays and Modules - Restraints and Safety
Systems/Air Bag Control Module/Service and Repair/Removal
Up to 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1627/82,B1628/82,B1637/82,B1638/82,B1647/82,B1648/82: Lost
communication with Side Airbag Sensor LH
B1648/82 - Side Satellite Sensor Bus LH Initialization Incomplete
DESCRIPTION
The side collision sensor LH circuit (to determine deployment of the front seat side airbag assembly LH, rear seat side airbag assembly LH and
curtain shield airbag assembly LH) is composed of the center airbag sensor assembly, side airbag sensor LH, and rear airbag sensor LH.
The side airbag sensor LH and rear airbag sensor LH detect impacts to the vehicle and send signals to the center airbag sensor assembly to determine
if the airbag should be deployed.
Theses DTCs are recorded when a malfunction is detected for the side collision sensor LH circuit (to determine deployment of the front seat side
airbag assembly LH, rear seat side airbag assembly LH and curtain shield airbag assembly LH).
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK PRESENT DTC
(a) Turn the engine switch on (IG), and wait for at least 60 seconds.
(b) Check for present DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/DTC Check / Clear.
No comments:
Post a Comment