Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. CONFIRM MODEL
(a) Choose the model to be inspected.
Result:
B -- CHECK HARNESS AND CONNECTOR
A -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR
(a) Disconnect the O15 stereo component amplifier assembly connector.
(b) Disconnect the G6 display and navigation module display connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
No comments:
Post a Comment